Sign in

Bessemer steel process

1856Turning point

Cheap mass-produced steel builds railways, ships, bridges and skyscrapers.

The story

In August 1856 the English inventor Henry Bessemer announced a way to make steel quickly and cheaply. He poured molten pig iron into a large egg-shaped vessel called a converter and blew cold air through it from below. The oxygen in the air burned away the excess carbon in the iron, and that burning released so much heat that the metal stayed molten without any extra fuel. A spectacular shower of sparks and flame erupted from the mouth of the converter, and in roughly 20 minutes several tons of iron became steel, a job that had previously taken days.

Steel is iron with a small, controlled amount of carbon, which makes it both strong and flexible. Pig iron from blast furnaces has too much carbon and is brittle; wrought iron has very little and is soft. Since Abraham Darby began smelting iron with coke in 1709, Britain could make huge amounts of iron, but steel still came from slow methods such as crucible steel, made in small batches, and was expensive enough to be used mainly for tools and blades. Railways, steam engines and ships of the 1850s were built of iron that wore out and cracked. Bessemer, a prolific inventor, came to the problem while trying to make stronger cannons during the Crimean War.

His process at first failed for many customers. The steel was often brittle because the air blast removed carbon but not phosphorus, and it left the metal full of oxygen. The metallurgist Robert Mushet found that adding a manganese-rich iron called spiegeleisen at the end fixed the oxygen problem, and Bessemer used only low-phosphorus ores. In 1878 Sidney Gilchrist Thomas and Percy Gilchrist lined the converter with limestone-based material that absorbed phosphorus, opening vast European ore deposits to steelmaking. In the United States, William Kelly had experimented with a similar air-blowing method, and Andrew Carnegie built a fortune on Bessemer plants.

The price of steel fell dramatically, and output soared. Steel rails lasted many times longer than iron ones, so railways expanded across continents. Steel made possible longer bridges, bigger ships and the frames of the first skyscrapers. By the early 1900s the open-hearth process, which allowed better quality control, was overtaking Bessemer converters, but the age of cheap steel had begun.

Why it mattered

  • Cheap steel wire made barbed wire affordable, fencing the open ranges of the American West.
  • Steel frames let architects build upward, leading to the first skyscraper in Chicago.
  • Strong, inexpensive steel went into weapons such as the Maxim machine gun and into enormous ships like the Titanic.
  • Engineers built record-setting structures from iron and steel, from long-span bridges to the Eiffel Tower.
  • Continued work on steel alloys produced stainless steel in the early 20th century.

Drafted by AI (Claude) from the sources above and checked against them by AI; no historian has reviewed this page. Spot a mistake? Suggest a correction. How pages are made

Community notes

Loading notes…

Learn more ranked by votes

Documentbritannica.com
Bessemer process (Britannica)
Editor's pick
BookHenry Bessemer
Sir Henry Bessemer, F.R.S.: An Autobiography
Search Open Library
VideoSearch YouTube
Bessemer process steel
Search YouTube